top of page
lost

"EZ UP" - LAZY TOYS Series

 

This one comes from personal experience. Back to Fall 2012. I had been surfing The LazyBoy and Couch Potato as a one/two punch around home all summer. As the winter swells started lining up, I soon realized that these boards were not going to cut it, unless I wanted to spend my winter surfing between swells and in shadow blocked SC. So, starting with my trusty 6’0 LazyBoy, I stretched it to 6’2”, pulled in the width a bit, added a little more bend through the length of the board (with some flip tip for steeps and late drops) and finally…most noticeably, a re-templated rear half of the board into a conservative, surface area reducing, rounded pin tail. The end result looks a lot like a 1970′s era double ender, and considering the nose to tail vee panels, it kind of is. With a more refined and aggressive rocker, profile and rails this board is not just a blast from the past. Many successful surfs in solid California winter waves followed. I ended up regularly making custom orders based off the board, tentatively calling it The LazyToy Step Up. Now, after two years of fine tuning, we finally organized it into a stock model and gave it a name that fits. The “E-Z Up”. Jokingly named as a very easy way to step up into better waves, after riding boards like the Couch Potato or LazyToy as daily drivers. Interestingly, the board also works pretty damn well even in mediocre surf.

 

EZ-UP/18:

Updated, refined and revised for 2018. Strategically reduced overall volume, to improve performance, while still retaining the ease of use.

 

The rails have been redesigned,with less volume in outer the perimeter, to provide more bite, drive and hold, eliminating much of the bulbous feel. The outline has been updated to have less curve through the center (making the outline more parallel) encouraging more drive, and confidence on fast, steep walls, and also adding glide across flat faces. The rocker and bottom curves were essentially left as is. We have hidden a bit more foam though the forward 1/3 of the board, to enable the now lower overall volume to still paddle as well as before. Basically, we have made this board perform better and still be a stable, easy to catch waves, forgiving board, but without so much excess volume.

 

Matt Biolos

 

Medidas Sugeridas pelo Matt Biolos (Stock Dims):

 

5’4 x 19.00 x 2.38 - 26.25 litros
5’5 x 19.13 x 2.40 - 27.25 litros
5’6 x 19.25 x 2.45 - 28.25 litros
5’7 x 19.50 x 2.50 - 29.75 litros
5’8 x 19.75 x 2.53 - 31.00 litros
5’9 x 19.88 x 2.56 - 32.00 litros
5’10 x 20.00 x 2.56 - 33.00 litros
5’11 x 20.25 x 2.63 - 34.50 litros
6’0 x 20.38 x 2.63 - 35.50 litros
6’1 x 20.50 x 2.66 - 36.75 litros
6’2 x 20.75 x 2.70 - 38.25 litros
6’3 x 20.88 x 2.75 - 39.75 litros
6’4 x 21.00 x 2.75 - 40.75 litros
6’5 x 21.25 x 2.84 - 43.00 litros
6’6 x 21.50 x 2.88 - 45.00 litros
6’7 x 21.63 x 2.88 - 46.00 litros
6’8 x 21.75 x 2.88 - 47.00 litros
6’9 x 21.88 x 2.90 - 48.25 litros
6’10 x 22.00 x 2.94 - 49.75 litros
7’0 x 22.00 x 3.00 - 51.50 litros
7’2 x 22.00 x 3.00 - 53.00 litros

 

OBS: Todas as pranchas anunciadas aqui são para encomenda e o prazo de produção estimado está logo abaixo descendo um pouco a tela. Você poderá optar por retirar a prancha conosco ou receber em sua casa (algumas regiões possuem taxa de frete). Voce pode escolher qualquer modelo em exposição no site, mas lembre-se de definir a configuração de personalização da sua prancha. As fotos de cada anúncio são meramente ilustrativas e as pinturas possuem custo a parte. O preço dos anúncios é com a prancha branca e com os copinhos para quilhas FCSII brancos ou Futures.

 

EZ UP

R$ 3.490,00Preço
  • Este modelo possui uma variedade de tamanhos disponíveis para encomenda e as opções de medidas aqui foram sugeridas pelo próprio criador da Lost Mayhem, o Mestre Shaper Matt Biolos.

     

    Sugerimos voce escolher alguma das medidas constantes na descrição do produto, mas caso tenha preferência para alguma medida específica, por favor escolha a opção "Gostaria de Medidas Personalizadas" que te auxiliaremos na configuração! Entraremos em contato com voce assim que recebermos seu pedido no sistema.

     

    Mas se tiver dúvidas sobre qual seria as melhores medidas para a sua prancha, não se preocupe, por favor nos envie uma mensagem via "Chat On-line" localizado no canto inferior direito ou ainda via nossos canais de atendimento no whatsapp, telefone, mensagem no site ou e-mail e te ajudaremos na configuração da sua prancha mágica!  Responderemos os mais rápido possível.

     

     

    Obrigado!

     

    LOST SURFBOARDS BRASIL

     

    Canais de Atendimento:

     

    Chat On-line

    Mensagem na página "Contato"

    E-mail: sac.lost@admgroup.com.br

    Whatsapp: (11) 98166-0000

    Telefone: (11) 3021-3611

     

    (Atendimendo de Segunda a Sexta Feira - das 13h as 20h)

lost_logo_blk.png
10X ou 10%.png

Prazo de Produção:
Aprox. 35 dias PU/Poliéster

Aprox. 60-120 dias EPS/EPOXY

Calculador de Volume

Clique na tabela abaixo para ampliar

Calculador de Volume
10X ou 10%.png
Frete Gratis SP,RJ,PR,SC,RS
ATENDIMENTO ONLINE.jpg
bottom of page